You are here
CMM COOLANT HEATING SYSTEM
The HOTSTART CMM is a complete, packaged heating
system with pump, PT-100 temperature sensors and all
required controls. The CMM heats engines up to 200L
displacement. Forced circulation of the coolant delivers
uniform heating throughout the entire engine, enhances
availability, decreases wear and tear from cold starts and
extends element life.
SPECIFICATIONS：
• Heating Fluid: Engine coolant (50% glycol/50% water)
• Power: 12 - 24kW
• Rated Voltage: 400V/50Hz/3ph, 440V/60Hz/3ph,
690V/50&60Hz/3ph
• Temperature Controller: Adjustable 32-212°F (0-100°C)
• Temperature Setting: 120°F (50°C)
• High Limit Temperature Control: Adj. 32-212°F (0-100°C)
• High Limit Temperature Setting: 195°F (90°C)
• Fluid Capacity: .8 gal (3.0L)
• Pump Power: 0.5Hp (0.37kW)
• Flow: 25GPM @ 20ft (5.7 m3
/hr @ 7.62mWc)
• Max Pressure: 125 psi (860 kPa)
• Pressure Loss @ Rated Flow: 3 psi (21 kPa)
• Pressure Relief Valve Setting: 100 psi (690 kPa)
• Inlet Plumbing: 1 inch NPT
• Outlet Plumbing: 1 inch NPT
• Main Control Box Ingress Protection: NEMA 4/IP66
• Motor Ingress Protection: IP55
• Ambient Temp. Rating: -20 - 40°C